Eco-friendly wood burner fuel pellets are a low emission, high calorific value, and sustainable product created from waste products from industrial timber proscessing.
Suitable for use in approved wood pellet boilers, these pellets are ideal for reducing your fuel consumption and carbon footprint, while saving you considerable amounts on your energy bills (customers reported up to a 40% saving).
Pellets produce little ash when used and are screened and sieved before shipment, ensuring a clean and hassle-free product for use in your home or business.
Ethically Cultivated from approved sustainable spruce & pine forests in Northern Ireland
Main Features:
Up to 40% savings on their annual energy bills
Reduced carbon emissions
No mess
Technical Specifications:
| Wood Pellet Specification | ENplus A1 | Zexum Pellet |
| Calorific Value: | 16.5 | 17.2 |
| 4.6kWh/Kg | 4.8kWh/Kg | |
| Ash (A0.7): | < 0.7% | 0.3% |
| Ash Deformation Temp: | > 1200°C | 1350°C |
| Moisture (M10): | < 10% | 7.5% |
| Additives: | < 2% of dry bases (natural) | < 2% |
| Dimensions (D06): | Dia. 6mm 1.0mm | Dia. 6mm 1.0mm |
| Length 3.15 < L < 40 | Length 3.15 < L < 40 | |
| Sulphur (S0.03): | < 0.04% | 0.028% |
| Chlorine (CL0.02) | < 0.02% | < 0.01% |
| Fines (F1.0) | < 0.5% | 0.24% |
| Mechanical Durablity | > 98% | 98.9 |
| Bulk Density | 600 < BD < 750 kg/m3 | 672 kg/m3 |
This IP44 Rated Tube Space Heater is constructed from a durable but lightweight steel and houses an internal thermostat which provides heat protection and reduces risk of fire & damage. Ideal for use in Conservatories, Garages, Workshops, Sheds, Greenhouses, or anywhere extra warmth is required.
This heater is suitable for running in series with other heaters in this range, and an additional locking cable gland is included.
This Pack Contains:
Bracket x 2
Clamp x 2
Plastic plugs x 4
Spare cable entry gland/nut x 1
Fixing screws x 4
Wall clip screws x 2
Screws x 2
Main Features:
IP44 Rated (protected from splashing water, ideal for bathrooms and greenhouses)
Steel body
Thermal overload protection
Low Power Consumption
Mounting brackets included for wall or floor installation
Pre-wired with 1.8 metres of mains lead and 3 pin plug for easy installation
Suitable for use in bathroom zone 2 if hard wired
Technical Specification:
1 Foot - 60W - 55mm Diameter, 305mm Length
2 Foot - 120W - 55mm Diameter, 600mm Length
3 Foot - 180W - 55mm Diameter, 915mm Length
4 Foot - 240W - 55mm Diameter, 1220mm Length
5 Foot - 300W - 55mm Diameter, 1524mm Length
6 Foot - 360W - 55mm Diameter, 1829mm Length
2 Year Warranty Included
Specification Sheet